Resin 3D-Printing Settings for Phrozen Shuffle 2018
The Phrozen Shuffle 2018 resin 3D printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Phrozen Shuffle 2018
General Printer Settings for Phrozen Shuffle 2018
| Resin | Layer thickness | Curing time (seconds) | Remark |
| WaxCast 3D | 100 µm | ||
| 50 µm | 11,0 | 2 base layers of 80 seconds | |
| 35 µm | |||
| Model 3D Ultra | 100 µm | ||
| 50 µm |
