Resin 3D-Printing Settings for Wanhao Duplicator 7 (D7)
The Wanhao Duplicator 7 (D7) resin printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Wanhao D7
General Printer Settings for Wanhao D7
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 14 | First layers 2x 180 seconds |
| 50 µm | 13 | First layers 2x 140 seconds | |
| 35 µm | 12 |
