Resin 3D-Printing Settings for Prusa SL1S Speed
The Prusa SL1S Speed resin printer is open for third-party resins. Some Garreco Print resins have been validated on the printer and settings are available below. Contact us if you need support or have any questions.
Resin 3D-print settings for the Prusa SL1S Speed
General Printer Settings for Prusa SL1S Speed
| Resin | Layer thickness | Curing time (seconds) | Remark |
| Model 3D Ultra | 100 µm | 4,5 | first layers 25 seconds |
| 50 µm | 3,1 | first layers 25 seconds | |
| 25 µm | 2,4 | first layers 25 seconds | |
| WaxCast 3D | 100 µm | ||
| 50 µm | 3.8 | first layers 25 seconds | |
| 35 µm | |||
| Model 3D Pro Beige | 100 µm | 7,5 | first layers 25 seconds |
| 50 µm | 5,0 | first layers 25 seconds | |
| 25 µm | 2,3 | first layers 25 seconds | |
| Gingiva 3D | 100 µm | ||
| 50 µm |
